Mopar 6G72 Garolite Throttle Body Spacer - $45 shipped

This 1" thick intake spacer kit works with the vehicles listed below. The spacer is installed between the intake manifold and the throttle body, where the throttle body gasket is located.

Since this spacer can fit on hundreds of combinations (vehicles, makes, and engines), please verify that there will not be any clearance problems arising from moving the throttle body out one inch.

The cooler throttle body will also help keep the power level stay more consistent. Most cars feel slightly sluggish on very hot days, or after a lot of stop-and-go driving. Part of this is because of the intake air becoming warmer. These spacers will help stop this power loss. This works even better in combination with blocking of the throttle body coolant line (if applicable).

I recommend buying an extra stock gasket from your local parts store, and sandwiching the spacer between two stock gaskets. RTV or equivalent sealant can also be used.

OTHER MOPAR 6G72 CHEETAH PRODUCTS:

MOPAR DELRIN FRONT MOTOR MOUNT

MOPAR DELRIN TRANSMISSION MOUNT

MOPAR GAROLITE INTAKE SPACER KIT

MOPAR DELRIN SHIFTER BUSHINGS

Cheetah Phenolic spacers are cut from a single piece of Garolite by CNC water-jetting. Garolite is a great heat insulator, and these insulating properties will keep the plenum and throttle body cooler; as it will not absorb as much heat via conduction from the engine. This results in a cooler air-intake temperature, which creates a denser charge that provides more horsepower. A great article on the effects of cooling via spacers can be read here.

The cooler plenum and throttle body will also help keep the power level stay more consistent. Most cars feel slightly sluggish on very hot days, or after a time of stop-and-go driving. This is in part because of the intake air temperature rising. These spacers will help stop this power loss. IN certain applications, these spacers also add volume to your plenum, or smooth out the path to the cylinders, which will help increase torque throughout the powerband.

Spacers are great bang-for-the-buck, proven performance item, especially on an already modified vehicle; while not having any negative side effects like lower gas mileage. Many spacers sold are a fiber phenolic. But all of Cheetah spacers are made from Garolite, which has equivalent insulation properties to normal Phenolic, but is more moisture resistant. This is preferred, since an engine bay can have many different climates, with varying humidity's. Many vehicles also run EGR and PCV vapors back through the intake, and Garolite stands up to this harsh environment; as it is also more chemically resistant. In addition, with a wet nitrous kit, extra injectors, or a water injection kit, there may be considerable amount of fluid in the intake.

Chrysler LeBaron	1990-1994	SOHC 12-valve 3.0L V6
Chrysler New Yorker	1988-1991	SOHC 12-valve 3.0L V6
Dodge Caravan	1987-2000	SOHC 12-valve 3.0L V6
Dodge Daytona	1990-1994	SOHC 12-valve 3.0L V6
Dodge Dynasty	1988-1993	SOHC 12-valve 3.0L V6
Dodge Shadow	1992-1994	SOHC 12-valve 3.0L V6
Dodge Spirit	1989-1995	SOHC 12-valve 3.0L V6
Plymouth Acclaim	1989-1995	SOHC 12-valve 3.0L V6
Plymouth Duster	1992-1994	SOHC 12-valve 3.0L V6
Plymouth Voyager	1987-2000	SOHC 12-valve 3.0L V6

or U.S. Postal Money Order
accepted through the U.S. Mail.

All prices are in US Dollars. These prices include shipping to America and Canada. I will ship internationally, if needed, but there will be additional shipping costs.
Please allow up to a two week turnaround, if quantities are out of stock.

The information contained on these pages are the views of the author, and constitute the author's opinion only.
Any damage or loss resulting from the use and / or misuse of the information and / or products here is the responsibility
of the reader and/or buyer. All items are sold as-is, and may be looked at on an individual basis.
ALL RIGHTS RESERVED.