Porsche Boxster Delrin Front Motor Mount

Porsche Boxster Delrin Front Motor Mount Warning: strpos(): Empty needle in /usr/local/www/groups/cheetahonline.com/docs/wp-includes/media.php on line 1145

This is a solid Delrin (Acetal) front motor mount for the Porsche Boxster 986. This mount is the same for either the standard or the S model.

The stock mount, is prone to failure, and has been known to fail at less than 30,000 miles. The stock mount is hollow and not very strong. The photo of a mount below was taken out of a stock Boxster S and has been completely ripped in half. The movement was very noticeable from inside the vehicle. With a Cheetah solid mount, the shifts are much crisper. There is a small amount of added vibration on a car, but pressing the gas pedal, the car is much more responsive, as the motor does not lose as much torque into the mounts.

The mount is installed just as the stock mount. Installation takes about 90 minutes, with floor jacks, a socket set, and a press to remove the old mount. The mount does not include the mounting bracket, only the insert replacement.

Stock mounts are available only from Porsche, and are $190 or higher. That stock mount will not survive long, especially with "spirited" driving, but the Cheetah mount should last the life of the vehicle.

Cheetah also offers a semi-solid polyurethane and Aluminum mount, for those who stock levels of vibration, with the added benefits of a much more solid and lasting mount.

text:
text:
link:
link:
sfw_comment_form_password: 1kOVhCT7DrVW
sfw_comment_form_password: 1kOVhCT7DrVW

Price: $ 125.00

Loading Updating cart...

No comments yet.

Leave a Reply

You must be logged in to post a comment.