Delrin Front Motor Mount for Mopar 3.0L

This is a solid Delrin (Acetal) front motor mount for SOHC (12-valve) 3.0L V6 (6G72) equipped Chrysler vehicles. This mount is the same for all three transmissions available with the V6, and in all the available models the engine was used.

Personally, I had destroyed (3) stock front motor mounts in my car. As shown below, the stock mount is hollow and not very strong. I have been using the Delrin mount since late 2000, and am very pleased with it. The motor sounds smoother and shifts are much crisper. There is not any noticeable added vibration on a car with any suspension modifications, actually the opposite seems true. Mashing the gas pedal, the car is much more responsive, as the motor does not lose as much torque into the mounts. On a car with a stock setup, there is some added vibration though; although not much.

The mount is installed just as the stock mount. Once on the car, it looks stock, unless one knows what to look for. Installation takes about 45 minutes, with floor jacks, socket set, and a hammer to knock the old mount out and fit the new mount in. The mount does not include the mounting bracket, as the bracket does not need to be removed from the vehicle.

text:
text:
link:
link:
sfw_comment_form_password: xdRPpqEY83R6
sfw_comment_form_password: xdRPpqEY83R6

Price: $ 65.00

Loading Updating cart...

No comments yet.

Leave a Reply

You must be logged in to post a comment.