Garolite Intake Spacer for Mopar SOHC 12v 3.0L

Garolite Intake Spacer for Mopar SOHC 12v 3.0L Warning: strpos(): Empty needle in /usr/local/www/groups/cheetahonline.com/docs/wp-includes/media.php on line 1145

This 1 inch thick intake spacer kit works with the vehicles that have the 12 valve 6G72 Mitsubishi V6 found in Mopar vehicles from the 80's and 90's.

These spacers will also add volume to your plenum, which will help increase torque throughout the powerband. Also the longer runners will help high-end power by straightening the airflow towards the cylinder at a farther distance from the valve, allowing it to gain momentum.

Insulating spacers have been around for a long time, and are a proven performance item.

This spacer is 1 inch thick to provide as much insulation as possible, while still having hood clearance. It is shipped with longer mounting bolts (5/16-24 X 3") because the spacer is much thicker than the stock gasket. Installation of this spacer is very straightforward, and is the same process as changing the stock gasket.

I recommend buying an extra stock gasket from your local parts store, and sandwiching the spacer between two stock gaskets. RTV or equivalent sealant can also be used.

text:
text:
link:
link:
sfw_comment_form_password: Bwr9zmPLqrcw
sfw_comment_form_password: Bwr9zmPLqrcw

Price: $ 100.00

Loading Updating cart...

No comments yet.

Leave a Reply

You must be logged in to post a comment.