Mitsubishi 2.5L / 3.0L V6 Garolite Intake Spacer

Mitsubishi 2.5L / 3.0L V6 Garolite Intake Spacer Warning: strpos(): Empty needle in /usr/local/www/groups/cheetahonline.com/docs/wp-includes/media.php on line 1145

This 1/4 inch thick intake spacer works with the above vehicles. The spacer is installed between the lower and upper intake manifold, where the intake gasket is located.

This spacer is 1/4 inch thick to provide as much insulation as possible, while still retaining stock intake supports and bolts. Installation of this spacer is the same process as changing the spark plugs. A good write-up of a spark plug installation can be seen here.

I recommend buying an extra stock gasket from your local dealer, and sandwiching the spacer between two stock gaskets. The Chrysler p/n for the 2.5L and the SOHC 3.0L is MD199282, for around $8. The Chrysler p/n for the DOHC Non-Turbo 3.0L is MD143791, and around $10. Although these use different part number gaskets, the newer MD199282 can be used in place of the MD143791. The MD199282 just has two extra holes. That is why this spacer is made to the MD199282, so that one spacer will work for all three engines. These gaskets can also be picked up at any Mitsubishi dealer. I would not recommend RTV or equivalent sealants since the walls around the openings are so small.

text:
text:
link:
link:
sfw_comment_form_password: e4ecTLoObWj2
sfw_comment_form_password: eP4GAifKeQZy
sfw_comment_form_password: e4ecTLoObWj2
sfw_comment_form_password: eP4GAifKeQZy

Price: $ 50.00

Loading Updating cart...

No comments yet.

Leave a Reply

You must be logged in to post a comment.